Ask for a quote Visit website
Find dealers / rentals

Write a review

Supercam S350

Product Name:Supercam S350
Product Description:Supercam S350 UAV was specially designed for severe conditions and is intended for aerial photographic surveying and video monitoring. In case of hard landing the wings are automatically detached from the center section in order to mitigate the risk of damage to the UAV elements. All you need to do for the flight is to assign a flight path to the UAV (either load GPS coordinates of route points directly, or indicate these route points on the map loaded to the software), and it will do the rest of it for you. The unmanned aircraft is launched by use of elastic catapult, takes off, executes an en-route flight and lands automatically. After that you just need to download highly detailed GPS geotagged images to your favourite program for photomaps, orthophotomaps, and DTMs creation. Every image has complete telemetry data – central point geographic coordinates, aerial surveying altitude and angle, and aircraft speed/roll/pitch.
Year of initial development::2010
Year of last update:2017
Typical Applications:Photogrammetry, 2D & 3D mapping, Agriculture, ISR
Brand :Supercam
Max. payload [kg]:2.5
Max. stay in the air [min]:270
Max. speed [km/h]:120
Max. height above ground [m]:5500
ø / wingspan [cm]:320
Height [cm]:25
Weight [kg]:5
Weight of battery [kg]:1.1
Weight of filled fuel tank [kg]:
Number of rotors:1
Transport on human back:N
Min. operation temperature [°C]:-40
Max. operation temperature [°C]:+40
Max. wind speed [m/sec]:15
Max. humidity [%]:100
Operation Characteristics and Safety 
Min. ø of launch/landing site [m]:50
Training provided:Y
Launching method:Elastic/Pneumatic catapult
Automatic launch and landing:Y
Autonomous emergency landing :Y
Collision avoidance systems (CAS):N
Navigation Sensors 
Type of GNSS receiver and captured signals:L1/L2 GNSS Receiver GPS/GLONASS
Type of IMU:
Correction services [PPK, RTK]:PPK
Other sensors and additional information:
Imaging/scanning devices 
Onboard imaging/scanning devices:RGB Camera, Additional sensors, Gimbal, NIR Camera
Type of Camera:20/24/42 Mp cameras with 20/21/35/50 mm lens
Build-in Stablilsation:Y
Exchangeable :Y
Sensor tilting to allow oblique views:Y
Type of Lidar:
Additional Sensors and additional information:Thermal Infrared Sensor, Multispectral, Hyperspectral Gyro-stabilized in 3 axis gimbals with EO, IR Night sensors and target tracking
Base Station 
Ground computer included:Y
Type of Ground computer:Based in the IP65 case
Sensor control:Y
Real time image and video download link:Y
Included software and automatically generated 
Type of software included:Block adjustment, Camera self-calibration, Flight planning, Photogrammetric software, Point cloud processing software
Automatically Generated Products:3D City Models, Point Clouds, 3D Landscape Models, DEMs, DTMs, Orthomosaics, NDVI maps
Flight planning software:Supercam 1.0
Photogrammetric software:Photomod, Pix4D
Point could processing software:Photomod, Pix4D
Additional information on software or automatically generated products:
Transportation accessories:UAV transportation case, GCS transportation case, charger and battery transportation case
Included batteries and charger:10/16 Ah
More included products and spare parts:Batteries, UAV body, wires, props, engine, cables etc.

Ask for a quote Visit website
Find dealers / rentals

Supplier Information



Other products in UAS for Mapping and 3D Modelling
Product Manual
Watch the video
All Product Categories