pay-off

 

Ask for a quote Visit website
Find dealers / rentals

Write a review

Trimble AP50


 
General 
Product Name:Trimble AP50
Product Description:features the high-performance precision BD982 GNSS receiver and the industry leading Applanix IN-Fusion™ GNSS-Inertial integration technology running on a powerful, dedicated Inertial Engine (IE) board. It is designed to give system integrators the ability to harness the best in GNSS multi-frequency positioning technology, with the superior capabilities of inertial data for continuous mobile positioning in poor signal environments, and for the orientation of imaging sensors.
Type of application:Air, Land, Marine
Year of initial development:
Height [m]:0.039
Width [m]:0.1
Length [m]:0.13
Weight [kg]:0.28
Min. Voltage (AC):
Max. Voltage (AC):
Min. Voltage (DC):10
Max. Voltage (DC):28
Power consumption [W]:20
Splashproof casting:N
Water resistant casting:N
Water resistance [m]:0
Mean time between failures [hr]:
Type of accelerometer:
Type of gyro:
Removable from base plate:N
Moving parts:
Environmental 
Non-operating shock tolerance [g]:
Operating shock tolerance [g]:
Min. operating temperature [C]:-40
Max. operating temperature [C]:75
Max. rotation speed [deg/s]:
Data formats 
NMEA formats:Y
RTCM:Y
Other :IARTK, RTX
GNSS Positioning Sensor 
Number of integrated GNSS receivers and antenna ports:2
No. channels p receiver:220
Tracked satellite signals:GPS L1, GPS L2, GPS L5, GLONASS L1, GLONASS L2, GLONASS L3, Galileo E1
SBAS differential signals:Y
RTK Network Compatibility:Y
Update rate [ Hz ]:5
Cold start [ seconds ]:
Hot start [ seconds ]:
GNSS positional accuracy 
Horizontal Position Accuracy [ RMS in cm ] :150
Horizontal Position Accuracy (SBAS) [ RMS in cm ]:50
Horizontal Position Accuracy (RTK) [ RMS in cm ]:2
GNSS aided uncertainty 
Heading [deg]:0.02
Pitch [deg]:0.008
Roll [deg]:0.008
Heave: constant part [m]:
Heave: variable part [%]:
Surge/sway [m]:
Increase in position uncertainty w.r.t. stand-alone GPS [m]:
EM log aided uncertainty 
Heading [deg]:
Pitch [deg]:
Roll [deg]:
Heave [m]:
Surge/sway [m]:
Decrease in position accuracy [m/hr]:
Doppler log aided uncertainty 
Heading [deg]:
Pitch [deg]:
Roll [deg]:
Heave [m]:
Surge/sway [m]:
Decrease in position accuracy [m/hr]:
Unaided uncertainty 
Heading [deg]:
Pitch [deg]:
Roll [deg]:
Heave [m]:
Surge/sway [m]:
Decrease in position accuracy [m/hr]:
Inertial Measurement Unit 
Accelerometer bias [µ-g]:
gyro bias [deg/hr]:
Calibration procedure:
Software 
Name:
Filtering:Y
Adaptable filter strength:Yes
Adaptable input signals:Y
Integrity monitoring of position input:Y
Integrity monitoring of log input:Y
Max. number of position input signals:
Max. number of log input signals:
Maximum latency of position input [ms]:
Maximum latency of log input [ms]:
Uncertainty indicators given in output:
Uncertainty of time stamp for output [ms]:
Other specifications 
Export restrictions:
Graphical user interface:Y
Typical application:Full position and orientation solution for direct georeferencing of remote sensing systems
Distinguishable features:The Trimble AP50 features a high-performance precision GNSS receiver and the industry leading Applanix IN-FusionTM GNSS-Inertial integration technology running on a powerful, dedicated Inertial Engine (IE) board. This flexible, modular design ensures the ability to perform full high-powered GNSS-inertial processing without sacrificing performance, and an upgrade path to next generation GNSS boards as they become available.
 


Ask for a quote Visit website
Find dealers / rentals


Supplier Information
  • Trimble

  • 935 Stewart Drive
  • 94085 Sunnyvale
  • CA
  • United States of America
See us at SPAR 3D

April 3-5 2017 Texas

 

 

Other products in Inertial Navigation Systems
Download the Brochure
All Product Categories