pay-off

 

Ask for a quote Visit website
Find dealers / rentals

Write a review

IMU440CA-400


 
General 
Product Name:IMU440CA-400
Description:The MEMSIC IMU440 is a high-reliability low power strapdown inertial system providing accurate measurement of angular rate and linear acceleration in dynamic environments, with output data also available in delta theta and delta velocity format. The IMU440 is offered in standard and high range sensor configurations to allow the best match for the user's application.
Year of last update:
Year of initial development:
System components:Accelerometer(s), Gyroscope(s)
Height [mm]:76.2
Width [mm]:95.3
Length [mm]:64.3
Weight [gr]:550
Power Supply  
Min. Voltage (DC):9
Max. Voltage (DC):42
Power consumption [W]:3
Environment 
Non-operating shock tolerance [g]:
Operating shock tolerance [g]:
Min. operating temperature [C]:-40
Max. operating temperature [C]:70
Splashproof casting:Y
Water resistant casting:N
Water resistance [m]:
Casting and coating:
Accuracy 
Heading static accuracy [ ° ]:
Heading dynamic accuracy [ ° ] :
Pitch and Roll static accuracy [ ° ]:
Pitch and Roll dynamic accuracy [ ° ]:
Operational 
Max. rotation speed [deg/s]:
Interface types:Digital and/or Analog
Interfaces :
Other interfaces and additional information:MEMSIC offers the NAV-DAC440 analog interface adapter for customers wishing to use the IMU440 in analog data acquisition systems. The NAV-DAC440 converts the IMU440 serial digital data to 9-channel BNC analog outputs.
Start up time [s]:
Output data formats:
Output frequency [ Hz ]:
Gyroscopes 
Num. of Gyroscopes :3
Range [± ° / sec]:400
Resolution [ ° / s ]:0.02
In-Run Bias Stability [ °/ hr]:10
Bandwidth [ Hz ]:25
Non-linearity [ % ]:0.5
Noise:
Alignment Error [ ± ° ]:
Accelerometers 
Num. of Accelerometers:3
Range [max g]:10
Resolution [mg]:0.5
In-Run Bias Stability [mg]:1
Bandwidth [ Hz ]:25
Non-linearity [ % ]:1
Noise:
Alignment Error [ ± ° ]:
Magnetometers 
Num. of Magnetometers:
Range [ ± Gauss ] :
Resolution [ microtesla ]:
In-Run Bias Stability [ nT ]:
Bandwidth [ Hz ]:
Non-linearity [ max % ]:
Noise :
Temperature sensor 
Temperatue sensor:
Temperature measurement range:
Resolution [ ° C ]:
Temperature measurement accuracy:
Pressure sensor 
Pressure sensor:
Measurement range [ Pa ]:
In-Run Bias Stability [ RMS Pa ] :
Noise:
Accuracy pressure sensor:
Additional specifications 
Distinguishable features :Each IMU440 is shipped with an interface cable, MEMSIC’s User’s Manual and NAV-VIEW 2.0 configuration and display software.
Application:Navigation and Control, Vehicle Testing, General Instrumentation
 


Ask for a quote Visit website
Find dealers / rentals


Supplier Information
  • MEMSIC

  • One Tech Drive - suite 325
  • Ma 01810 Andover
  • Massachusetts
  • United States of America

 

 

Other products in Inertial Measurement Units (IMUs)
All Product Categories